| 序号 |
题目 |
期刊 |
卷次 |
作者 |
收录情况 |
| 1 |
Springback Control of
Sheet Metal Forming
Based on High Dimension
Model Representation
and Genetic Algorithm |
8TH INTERNATIONAL
CONFERENCE AND
WORKSHOP ON
NUMERICAL SIMULATION
OF 3D SHEET METAL
FORMING PROCESSES
(NUMISHEET 2011),
PTS A AND B. |
2011, 1383:
1050-1055 |
Tang Long
Wang Hu;
Cai Yong; |
ISTP/EI |
| 2 |
Heat Load Analysis
of Piston Based on
the ANSYS |
ADVANCES IN
MECHANICAL
DESIGN, PTS 1
AND 22 |
2011, 199-
200 :1192-1195 |
Yang Jing
Wang Yi;
Xiao Ming WEI |
ISTP/EI |
| 3 |
Improvement to
the Gear Reducer
for a 45T Mining Car |
ADVANCED
MANUFACTURING
SYSTEMS, PTS 1-3 |
2011, 201-
203:514-517 |
Cao Libo
Deng ZhiwEI;
Xiong Tiegang |
ISTP/EI |
| 4 |
Body Welding
Quality Control
based on a CUSUM
Control Chart |
MACHINERY,
MATERIALS SCIENCE
AND ENGINEERING
APPLICATIONS,
PTS 1 AND 2. |
2011, 228-
229 : 1080-1084 |
Li Rong;
Li Jing;
Liu Jian |
ISTP/EI |
| 5 |
The dynamic
response of the
clamped beam
under low velocity
impact |
Advanced Materials
Research |
2011, 328-
330:1017-1021 |
Long, Wengui
Tan, Zhuhua ;
Liu, Yang ;
Wang, Furui |
EI |
| 6 |
Mixed H2/H state
feedback controllers
of EPS system based
on genetic algorithm |
Proceedings -
2010 International
Conference on Intelligent
System Design and
Engineering Application,
ISDEA 2010 |
2010: 940-944 |
Xiaolin, Song
Chenchao |
EI |
| 7 |
Simulation and fuzzy
control strategy
analysis on 4WD
hybrid electric
off-road vehicle |
Advanced Materials
Research |
2011, 291-
294:1568-1571 |
Zhu, Sangzhi
Wang, Yu |
EI |
| 8 |
The modeling and
application of moving
deformable barrier
model with beam
element |
Applied Mechanics
and Materials |
2011, 80-81:
922-926 |
Cao, Libo
Cheng,
Wentao ;
Shi, Xiangnan |
EI |
| 9 |
Vector calculation
for tool envelope
surface in five-axis
NC machining |
advanced Materials
Research |
2011, 314-
316:1242-1245 |
Zhou, Yuansheng
Yang, Xujing ;
Ze Zhong
Chevy Chen |
EI |
| 10 |
Flow stress constitutive
equation of AZ31
magnesium alloy
for hot compression |
Advanced Materials
Research |
2011, 328-
330:1614-1618 |
Wu, Wen Hua
Lou, Yan |
EI |
| 11 |
Effect of turbulence
model on simulation
of trailing vortex
around ahmed body |
Advances in
Mechanical Engineering |
2011: 1905-1910 |
Yang, Xiao Long
Hu, Kai Yao ;
Lin, Tie Ping ;
Yang, Jia |
EI |
| 12 |
Identification of
material parameters
of door trim panel
based on sled test |
2011 International
Conference on
Consumer Electronics,
Communications
and Networks
(CECNet) |
2011: 4614-4618 |
Cao Libo
Zhao YifEI ;
Jiang Binhui ;
Cui Taisong |
EI |
| 13 |
Mechanical and
tribological properties
of PTW/PTFE/PPS
/PES composites |
Advanced
Materials Research |
2011: 205-209 |
Long, Chunguang
Li, Rongfeng;
Su, Yang ;
Hua, Manyu ;
Cao, Taishan ;
Xie, WEI ;
Yu, Xiaofeng |
EI |
| 14 |
Simulation and grey
relational analysis
of continuous
regeneration balance
point of diesel
particulate filters |
2011 International
Conference on Electric
Information and
Control Engineering,
ICEICE 2011 -
Proceedings |
2011: 5297-5301 |
Gong, Jinke
Liu, Hengyu ;
Long, Gang ;
Jiaqiang, E. ;
Du, Jia;
Zhang, Fujie |
EI |
| 15 |
Simulation for
series-parallel hybrid
electric vehicle
powertrain system |
2011 International
Conference on
Electric Information
and Control Engineering,
ICEICE 2011 -
Proceedings |
2011: 2582-2586 |
Liu, Jingping
Li, Yingchun ;
Xu, Zhengxin ;
Xia, Xiaolang |
EI |
| 16 |
A method for designing
and studying engine
intake system based
on CAD/CAE/CFD
integration |
Proceedings - 3rd
International Conference
on Measuring Technology
and Mechatronics
Automation, ICMTMA 2011 |
2011:99-103 |
Fu, Jianqin
Liu,
Jingping ;
Deng,
Banglin ;
Feng, Kang ;
Feng, Renhua |
EI |
| 17 |
Analysis of lateral
disturbances on high
-speed vehicle stability |
2011 International
Conference on Consumer
Electronics, Communications
and Networks, CECNet
2011 - Proceedings |
2011: 1977-1981 |
Li, WEI-Ping
Yin, Shi-Feng ;
Wang, Shi-Dong |
EI |
| 18 |
Synchronous control
strategy for electric
vehicle based on no
clutch shifting |
2011 International Conference
on Electric Information
and Control Engineering,
ICEICE 2011 - Proceedings |
2011: 778-781 |
Yang, Yi
Wang, Jisheng |
EI |
| 19 |
The effect of injector
position on the performance
of a homogeneous
direct injection
gasoline engine |
2011 International Conference
on Electric Information
and Control Engineering,
ICEICE 2011 |
2011: 6256-6259 |
Yang, Xiaolong
Yang, Jia ;
Hu, Kaiyao |
EI |
| 20 |
Underhood thermal
analysis and improvement
of a bus with rear
engine compartment |
2011 International Conference
on Electric Information and
Control Engineering,
ICEICE 2011 |
2011: 2826-2829 |
Hu, Kaiyao
Yang, Xiaolong ;
Yang, Jia |
EI |
| 21 |
A bidirectional
equalization and
management system
applied on EV |
2011 International Conference
on Electric Information and
Control Engineering,
ICEICE 2011 - Proceedings |
2011:1902-1905 |
Chen, Guang
Huang, Zhi ;
Zhong, Zhihua |
EI |
| 22 |
A magnetoelectric
screw dislocation
interacting with an
elliptical inhomogenEIty
containing a confocal
rigid line |
Advanced Materials
Research |
2011:239-242 |
iang, Chun ZhiLiu,
You Wen ;
Xie, Chao |
EI |
| 23 |
A method to reduce
engine intake noise
based on numerical
simulation |
2011 International Conference
on Electric Information
and Control Engineering,
ICEICE 2011 |
2011:1921-1924 |
Fu, Jianqin Liu,
Jingping ;
Deng, Banglin ;
Feng, Kang |
EI |
| 24 |
A study on the
prospect of engine
exhaust gas energy
recovery |
2011 International Conference
on Electric Information and
Control Engineering,
ICEICE 2011 - Proceedings
Abbreviated source title:Int.
Conf. Electr. Inf.
Control Eng., ICEICE - Proc. |
2011: 1960-1963 |
Fu, Jianqin Liu,
Jingping ;
Yang, Yanping ;
Yang, Hanqian |
EI |
| 25 |
Analysis on metal
allowance of the
auto panel die
casting blank in
the rough machining |
2011 International Conference
on Consumer Electronics
Communications and
Networks, CECNet 2011 -
Proceedings |
2011: 1071-1074 |
Chen, Jing
Wang, Fulin ;
Yang, Xujing ;
Fu, Jie |
EI |
| 26 |
Development of
the sandwich guardrail
based on crash
simulation and test |
2011 International Conference
on Electric Information
and Control Engineering,
ICEICE 2011 |
2011: 4938-4941 |
Bai, Zhonghao
Liu, Yunpeng ;
Zhang, Guanjun |
EI |
| 27 |
Diffusion model of
successive generations
associated with
competition and
heterogenEIty: The
mini passenger
vehicle in China case |
CCIE 2011 - Proceedings:
2011 IEEE 2nd International
Conference on Computing,
Control and Industrial
Engineering |
2011: 341-344 |
Zhao, Xiaoyu ;
Cheng, Aiguo ;
Zhong, Zhihua ;
Shen, Yang |
EI |
| 28 |
Effects of prolonged
truck driving on drive
safety based on
real road driving |
2011 IEEE 18th International
Conference on Industrial
Engineering and Engineering
Management, IE and EM 2011 |
2011: 1241-1244 |
Liu, Xiang
Liu, Jian ;
Wang, Xiang-Yin;
Zhang, Jing |
EI |
| 29 |
Optimization of
Co-driver restraint
system in frontal crash |
2011 International Conference
on Electric Information
and Control Engineering,
ICEICE 2011 - Proceedings |
2011: 5176-5179 |
Cao, Libo
Wu, Jun ;
Ai, Jun |
EI |
| 30 |
Study on thermal
management for the
engine compartment
of a rear engine bus
based on STAR-CCM+ |
2011 International Conference
on Electric Information and
Control Engineering,
ICEICE 2011 - Proceedings |
2011: 6184-6187 |
Yang, Jing
Fan, Mingming ;
Ren, Chengqin ;
Feng, Renhua |
EI |
| 31 |
Modeling and testing
of low-speed electric
vehicle |
2011 International Conference
on Electric Information
and Control Engineering,
ICEICE 2011 - Proceedings |
2011: 2355-2357 |
Ding, Zhoubo
He, Liping ;
Dong, Zuoming |
EI |
| 32 |
The Friction Analysis
of Main Bearing on An
Internal Combustion
Engine Based on
Multi-body Dynamics
and Elasto-Hydrodynamic |
2011 International Conference
on Electric Information
and Control Engineering |
2011: 5 pp. |
Deng Banglin
Yang Jing ;
Fu Jianqin ;
Chen Shanping ;
Wang Shuqing |
EI |
| 33 |
A Simulation Study
on the Effects of
Chamber Geometry
on Combustion and
Emission in a Diese
l Engine |
2011 International Conference
on Electric Information and
Control Engineering |
2011:4 pp. |
Li Juncheng
Han Zhiyu ;
Chen Zheng ;
Du Biao ;
Liu Yun |
EI |
| 34 |
Effect of Turbocharging
System on the
Performance of a
Gasoline Engine |
2011 International Conference
on Electric Information and
Control Engineering |
2011: 4 pp |
Wang Shuqing
Liu Jingping ;
Xia Xiaolang ;
Wang Yong ;
Chen Shanping ;
Yin Lin |
EI |
| 35 |
The Effects of Different
Rear Slant Angles and
Ride HEIghts on
Aerodynamic Lift Force |
2011 International Conference
on Electric Information and
Control Engineering |
2011: 4 pp |
Xin Song
Zhengqi Gu |
EI |
| 36 |
The status and
development trend
of hydraulic hybrid
vehicle |
2011 International Conference
on Electric Information and
Control Engineering |
2011: 4 pp. |
Yin Ling
Liu Jingping ;
Yang Hanqian ;
Xia Xiaolang ;
Zhao Zhichao ;
Chen Shanping |
EI |
| 37 |
Transmission System
Performance Analysis
of Traditional
Power Vehicle |
2011 International Conference
on Electric Information and
Control Engineering |
2011: 4 pp |
Feng Kang
Liu Jingping ;
Fu Jianqin ;
Yang Hanqian |
EI |
| 38 |
Numerical Simulation
of Aluminum Alloy
Hot Rolling using
DEFORM-3D |
2011 IEEE International
Conference on Computer
Science and Automation
Engineering (CSAE) |
2011: 378-81 |
Huang Chang-qing
Deng Hua ;
Diao Jin-peng;
Hu Xing-hua |
EI |
| 39 |
A novel cascade
approach to multibody
system modeling |
Proceedings of the 13th
IASTED International
Conference on Control
and Applications, CA 2011 |
2011:141-148 |
Huang, Jin
Chen, Ye-Hwa;
Guo, Konghui |
EI |
| 40 |
Research on product
development resource
allocati on modeling
based on hierarchical
colored Petri net |
Applied Mechanics
and Materials |
2011, 44-47
:138-142 |
Deng, Qianwang
Yang, Liping |
EI |
| 41 |
Microstructure and
creep properties of
casting Mg-8Al-0.3Mn
alloy containing
Ca and Sr |
Advanced Materials
Research |
2011, 189-
193:1386-1392 |
Lou, Yan ;
Li, Luo Xing |
EI |
| 42 |
Research on technology
of process-oriented
virtual assembly
modeling for product
information |
Advanced Materials
Research |
2011, 314-416:2177-2184 |
Liu, Zijian
Wan, Jingjing ;
Wang, Ping |
EI |
| 43 |
A study of the
key technology of
IEEE802.11p-2010 |
Proceedings of the
SPIE - The International
Society for Optical
Engineering |
2011:
82852D (7 pp.) |
Hu Lin
Kaiser,
T. ; Kupferschmidt,
C. ; Hieu Nguyen;
Huang Jing |
EI |
| 44 |
Simulation planning
of robot welding line |
2011 Second International
Conference on Mechanic
Automation and Control
Engineering |
2011:
1612-15 |
Qiu Zhu
Qianwang Deng |
EI |
| 45 |
Performance optimization
of miller cycle apply
on a natural gas engine |
2011 Second International
Conference on Mechanic
Automation and Control
Engineering |
2011: 6665-8 |
Shanping Chen
Jingping Liu ;
Hanqian Yang ;
Shuqing Wang ;
Ling Yin |
EI |
| 46 |
Investigation on
densification of metal
foam under dynamic
loading |
2011 Second International
Conference on Mechanic
Automation and Control
Engineering |
2011: 5874-7 |
Yang Liu
Zhuhua Tan ;
Wengui Long ;
Chen Chen |
EI |
| 47 |
Order Tracking
Demodulation Analysis
Based on Ensemble
Empirical Mode
Decomposition and
Its Applications to
Fault Diagnosis |
2011 International Conference
on Electrical and
Control Engineering (ICECE) |
2011: 4614-18 |
Kun Fang
Yu Wang ;
Xiangzhou Wang ;
Junsheng Cheng |
EI |
| 48 |
A study on performance
and soot emission of
a high-speed diesel
engine fueled with
butanol-diesel blends |
2011 International Conference
on Electric Information
and Control Engineering,
ICEICE 2011 –
Proceedings2011 |
2011，
4742-4745 |
Du Biao,
Han Zhiyu,
Chen Zheng,
Liu Yun |
EI |
| 49 |
Analysis of impact
factors of fuel-gas
mixing performance
for gasoline direct
injection engine |
2011 International Conference
on Electric Information and
Control Engineering,
ICEICE 2011 – Proceedings2011 |
2011，
5695-5699 |
YANG Hanqian
LIU Jingping,
YIN Ling |
EI |
| 50 |
Challenges Facing
the Low Temperature
Diesel Combustion
Boosting System |
2011 International Conference
on Electric Information and
Control Engineering,
ICEICE 2011 – Proceedings2011 |
2011，
5744-5747 |
Liu Jingping
Xia Xiaolang,
Wang Shuqing |
EI |
| 51 |
Design and analysis
of a vertically taking
off and landing
amphibian vehicle
with duct fan |
2011 International Conference
on Electric Information and
Control Engineering,
ICEICE 2011 – Proceedings2011 |
2011，
4859-4863 |
WEN Guilin,
CHEN Zhewu,
WANG Yanguang |
EI |
| 52 |
Numerical simulation
on the influence of
solar incidence angle
on the car internal
flow field |
2011 International Conference
on Electric Information and
Control Engineering,
ICEICE 2011 – Proceedings2011 |
2011，
5143-5146 |
Yi Yang
Yin Yuqi |
EI |
| 53 |
The influence of lean
Combustion and EGR
on Combustion and
Emissions of
Gasoline Engine |
2011 International Conference
on Electric Information and
Control Engineering,
ICEICE 2011 – Proceedings2011 |
2011，5513
-5516 |
Liu Jingping
Wang Yong |
EI |
| 54 |
A Research of
Turbocharged
Gasoline Transient
Response |
2011 International Conference
on Electric Information and
Control Engineering,
ICEICE 2011 – Proceedings2011 |
2011，4719
-4722 |
XU Xinsheng
LIU
Jingping,
WANG Yong |
EI |
| 55 |
Investigation on
densification of
metal foam under
dynamic loading. |
2011 Second International
Conference on Mechanic
Automation and Control
Engineering |
2011 ,
5874-5877 |
Yang Liu
Zhuhua
Tan,
Wengui Long,
Chen Chen |
EI |
